Compass PRO v7.38 (Mod Ad Free) [Android] – AppzDam

****IMPORTANT: To use, hold your Android device flat, use just like a real compass. Your device must have MAGNETIC SENSOR inside to read earth magnetic field. If your device does not have magnetic sensor Compass PRO or any other compass app will not work. PLEASE DON’T WRITE BAD COMMENTS, IT’S NOT OUR FAULT!****

Compass PRO has the following functions:
– Shows direction of north, south, east and west
– Shows degrees in “side window”
– Rotating bezel
——————
HOW TO USE COMPASS PRO?
First we’ll need to cover a little bit of compass jargon first. The part of Compass
PRO that moves and always points north is called the card (with N,S,E,
and W indicated, and a beveled edge with a series of numbers on it).
There is a movable ring around the edge of the compass, called the bezel. A red double line across the top of the compass is called the lubber line, and finally, there is a little window above the compass which is often named as side-window (as it is on the side of a real compass).
Side-window navigation couldn’t be simpler. You point the lubber line on top of your compass at where you want to go. Now as long as you hold your compass
flat in front of you with the lubber line pointing in the direction
you’re going, you should always see the same number in your window as
long as you’re going the right way. If you see a different number, turn
until you see the same number.
The downside of the side window method is that you need to remember your number.
Navigating
with bezel works essentially the same as using the side window, but
your bezel remembers your number for you. All you do is, point the
lubber line on top of your compass at
where you want to go, and then wait until the card settles down and
stops moving. Then turn your bezel until the double triangle on the edge
of the bezel (the notch right by the number zero on the bezel) is
bracketing the north arrow on the card. Now as long as you hold your compass
flat in front of you with the lubber line pointing in the direction
you’re going, you should always see the north arrow inside the notch, as
long as you’re going the right way. If not, turn until you see the
north arrow inside the notch.
Notice that if you’ve adjusted the
bezel correctly, the number in the side window is also the number
directly across from you at the front end of the lubber line. In other
words, if you turned the bezel counterclockwise until the notch
bracketed the north arrow, the 120 on the bezel would be at the far end
of the lubber line. Notice that on the card, the number showing in the
side window is 120. If you were holding this compass and going in the direction of the lubber line, you’d be on a heading of 120.
Now
you should have learned how to go to desired direction. But how do you
get back? Easy! If you’re thinking in terms of the bezel, simply turn
until the north arrow faces not to the notch, but to the single triangle
that’s exactly across from the notch. Now you’re pointed back where you
came.
The really tricky part of using your compass isn’t learning what the numbers mean and how to adjust the bezel. The most common mistakes are not holding your compass flat, and not actually going in the direction your lubber line is pointing.
Large
iron and steel objects can influence the magnetic sensor in your
Android device, causing it to point in the wrong direction. This is
called deviation. If you suspect this is happening, simply move away
from the object several feet and the problem should correct itself.
————
Other features:
– Simple to use, use it like a real compass
– Professional design
– Large numbers and large rotating bezel
– Audio Effects on rotating bezel
– Incredibly smooth movements
– Professional and optimized coding to keep application size as small as possible

This app has no advertisements

Direct Download
click to begin
3.6 MB

Leave a Reply

Your email address will not be published. Required fields are marked *